Latch Release Cable, Removing And Installing: Installing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Installation in reverse order of removal and note the following:
-- Engage the release cable nipple -3- in the coupling roller -2- and push the release cable into the cable bracket.
-- Position the housing cover -1- so that the printed line points toward the free coupling connection.
-- To release the latches evenly, adjust the release cable at the thumbwheel.
Installation in reverse order of removal and note the following:
-- Engage the release cable nipple -3- in the coupling roller -2- and push the release cable into the cable bracket.
-- Position the housing cover -1- so that the printed line points toward the free coupling connection.
-- To release the latches evenly, adjust the release cable at the thumbwheel.