Latch Release Lever Mounting Bracket, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the latch release lever. Refer to LATCH RELEASE LEVER, REMOVING AND INSTALLING .
-- Remove the A-pillar lower trim panel. Refer to A-PILLAR TRIM PANEL, REMOVING AND INSTALLING .
-- Loosen the release cable -4- from the cable bracket -3- and disengage the release cable nipple -arrow-.
-- Remove the bolts -2 and 5-.
-- Remove the mounting bracket -1-.