LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Hood, Lids) >> 55 Hood, Lids >> Hood >> Gas-Filled Strut, Removing And Installing >> Installing

Gas-Filled Strut, Removing And Installing: Installing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Installation in reverse order of removal and note the following:

-- Press the gas-filled strut onto the ball stud until it engages audibly.

scientia non olet · About LEMON Manuals