LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 85 (Hood, Lids) >> 55 Hood, Lids >> Fuel Filler Door Unit >> Emergency Release Cable, Removing And Installing >> Removing

Emergency Release Cable, Removing And Installing: Removing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the fuel filler door unit. Refer to FUEL FILLER DOOR UNIT, REMOVING AND INSTALLING .

-- Remove the fuel filler door lock motor. Refer to Fuel Filler Door Lock Motor -V155-, REMOVING AND INSTALLING .

-- Thread the release cable -1- out of the guide -4-.

GWWA55-11112Courtesy of AUDI OF AMERICA, LLC

-- Disengage the tab -3- on the emergency release mount -2- and remove it from the cable bracket.