Convertible Top Compartment Seal, Removing And Installing: Installing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Position the convertible top compartment seal -3- on the body seam and press in at the same time.
- The tabs -2 and 7- must engage in the mounts on the side trim panel -1-.
- The retaining strip -5- must engage at the same time under the window shaft strip -6-.
-- The convertible top compartment seal must be flush with the side trim panel.
-- The sealing lip -4- must be positioned behind the body seam.