Lane Change Assistance Control Modules -J769- / -J770-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Release the catch -3- and tilt the control module -2- out in the direction of -arrow-.
-- Disengage and remove the control module from the lower mount -4-.
-- Disconnect the connector -1-.