Central Locking -Safe- Indicator Lamp -K133-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
TIP:
The new Central Locking -Safe- Indicator Lamp -K133- must be connected with the door trim panel wiring harness.
-- Disconnect the wire and connect it with the new wire for the Central Locking -SAFE- Indicator Lamp -K133-. Refer to WIRING HARNESSES, REPAIRING .