Cigarette Lighter -U1-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

CAUTION:

Risk of injury due to the preglow from the removed cigarette lighter socket.

- Check the tab on the socket.

- After removing the socket, push the springs back together carefully.

-- Remove the support -1- from the Cigarette Lighter Release Tool : T40148 .

Fig 1: Identifying Support, Thumbwheel, Release Tabs, Release Tool T40148 & Cigarette Lighter

Courtesy of AUDI OF AMERICA, LLC

-- Slide the piston down and hold it in place.

-- Turn the thumbwheel -4- on the Cigarette Lighter Release Tool :T40148 counter-clockwise -arrow-. This loosens the release tabs -2- on the cigarette lighter -3- so the Cigarette Lighter Release Tool :T40148 can be removed.