12 V Socket 2 -U18- /12 V Socket 3 -U19-, REMOVING AND INSTALLING: Removing

-- Remove the rear center console trim. Refer to CENTER CONSOLE REAR TRIM, REMOVING AND INSTALLING .

-- Socket trim: Remove the blind cover.

-- Socket folding compartment: Open the folding compartment and remove the lighter.

-- The release tabs -2- on the :T40148  must engage in the openings on the cigarette lighter -3- in the direction of -arrow-. To do so, the threaded rod -1- must be slid all the way down.

Fig 1: 12 V Socket 5 -U26-

Courtesy of AUDI OF AMERICA, LLC

-- Slide the :T40148  all the way into the cigarette lighter -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Turn the thumbwheel -2- on the :T40148  clockwise all the way to the end stop.

• The piston -2- is pulled upward and the release tabs -1- on the :T40148  spread in the direction of -arrows-.
  Fig 2: Identifying Release Tool T40148 In Use

  Courtesy of AUDI OF AMERICA, LLC

-- Remove the cigarette lighter from the illumination ring with the Socket Illumination Bulb -L42- using the :T40148  .

-- Guide the wire out through the mount.