LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Crankshaft, Cylinder Block [CVKB,DBPA,CWNA,CVLA,DEMA,DHDA]) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Engine Support, Removing And Installing >> Right Engine Support, Removing And Installing >> Removing

Right Engine Support, Removing And Installing: Removing

WARNING: This page is about a different car, the 2020 Audi A4, 2019 Audi A4, 2018 Audi A4, and 2017 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the battery. Refer to BATTERY .

-- Remove the right engine mount. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .

-- Remove the nut -2- and the bracket and free up the bracket with the wire.

GWWA10-12032Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolts -arrows- and remove the right engine support -1-.

NOTE:

For clarity, the removed engine is shown.