Right And Left Front Abs Wheel Speed Sensor -G45- / -G47-, Removing And Installing: Installing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal while noting the following:
- Clean the bolts and nuts before reusing.
- Replace damaged bolts and nuts.
- Replace the self-locking bolts and nuts after removal.
-- Before inserting the speed sensor, clean the inner surface of the hole and coat the speed sensor all around with Grease :G 000 650 .
-- After installing, turn the steering all the way to the left and right, to make sure the speed sensor wiring has sufficient clearance.