Overview - Rear Axle Speed Sensor
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Wheel Bearing
- With integrated ABS sensor ring
- Wheel Bearing Housing
- Clean the inner surface of the hole before inserting the speed sensor.
- Bolt
- Tightening specification. Refer to OVERVIEW - WHEEL BEARING .
- Bolt
- 9 Nm
- Rear Speed Sensor
- Installation position differs on FWD and AWD
- Right Rear ABS Wheel Speed Sensor -G44-
- Left Rear ABS Wheel Speed Sensor -G46-
- Refer to RIGHT AND LEFT REAR ABS WHEEL SPEED SENSOR -G44- / -G46-, REMOVING AND INSTALLING
- Coat the speed sensor all around with Grease :G 000 650 before inserting.
- Installation position differs on FWD and AWD