LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Mechanical Components (Brake System) (1 Of 2)) >> 46 Mechanical Components >> Front Brakes >> Brake Rotor, Removing And Installing >> Brake Rotor, Removing And Installing, Steel Brakes >> Removing

Brake Rotor, Removing And Installing, Steel Brakes: Removing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the brake caliper. Refer to BRAKE CALIPER, REMOVING AND INSTALLING .

CAUTION:

There is a risk of damaging the brake rotors if force is used.

- Do not use force to separate the brake rotor from the wheel hub.

- Use the rust remover.

-- Remove the bolt -arrow- and remove the brake rotor.

Fig 1: Identifying Bolt And Brake Rotor
GWWA46-10405Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals