Brake Pedal, Removing And Installing: Installing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
Always replace the self-locking nuts and bolts.
Replace damaged bolts and nuts.
Clean the bolts and nuts before reusing.
-- Insert the mounting pin -3- from the left all the way and secure using the clip -2- and bolt -arrow-.
-- Connect the brake pedal -1- to the brake booster. Refer to BRAKE PEDAL, DISCONNECTING FROM BRAKE BOOSTER .
CAUTION:
Faulty brakes increase the risk of an accident.
- Make sure the brakes are working correctly before driving the vehicle for the first time.