Ribbed Belt Pulley Without Freewheel, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the generator if necessary. Refer to GENERATOR, REMOVING AND INSTALLING .
-- For some engine types the removal can be performed with the generator still installed, here only the ribbed belt must have the tension released and be removed.
-- If present, press the protective cap off the generator pulley.
-- Counterhold nut using :3310 and rotate generator shaft clockwise to loosen it.
-- Remove ribbed belt pulley.