Starter, Removing And Installing, Vehicles With 6-Cylinder TFSI Engine: Installing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Sealing piece, version 1:

Courtesy of AUDI OF AMERICA, LLC

-- Check the sealing piece -arrow- for the correct installation position.

TIP:

If the starter assembly is difficult to move, use a silicone-free lubricating spray.

Sealing Piece, Version 2:

Courtesy of AUDI OF AMERICA, LLC

-- Clean the contact surface -1- on the lower timing chain cover and on the sealing piece -2- with Cleaning Solution:D 009 401 04 .

-- Bond the sealing piece to the lower timing chain cover.

-- Connect the battery. Required actions. Refer to Connecting .