Cover And Cushion, Removing And Installing, Folding Backrest: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear seat backrest. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING, OUTER FOLDING BACKREST .
-- Remove the rear headrest. Refer to HEADREST, REMOVING AND INSTALLING .
-- Remove the locking mechanism trim. Refer to LOCKING MECHANISM TRIM, REMOVING AND INSTALLING .
-- Unclip the outer bearing sleeve -1- from the rear seat backrest with the :T10383/1 -arrow-.
-- Starting at the locking mechanism, use a screwdriver to pry off the clamping strip -2- for the backrest cover all around the backrest frame -3- in direction of -arrow-.
Fig 1: Prying Off Clamping Strip -2- For Backrest Cover Using A Screwdriver All Around Backrest Frame -3- -Arrow-
-- Remove the rear headrest guides. Refer to HEADREST GUIDE, REMOVING AND INSTALLING, OUTER FOLDING BACKREST .
-- Remove the backrest cover -1- and backrest cushion from the backrest frame.