LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Seat Frames) >> 72 Seat Frames >> Rear Seats >> Outer Bearing Sleeve, Removing And Installing >> Removing

Outer Bearing Sleeve, Removing And Installing: Removing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the backrest. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING, OUTER FOLDING BACKREST .

-- Unclip the bearing sleeve -2- from the backrest -1-. Do not damage the cover while doing so.

Fig 1: Unclip Mount From Backrest
GWWA72-10646Courtesy of AUDI OF AMERICA, LLC
scientia non olet · About LEMON Manuals