Center Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bench seat. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .

-- Fold the folding backrests forward.

-- Remove the bolt -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Disengage and remove the securing bracket -1- from the center support -arrow-.

NOTE:

For clarity, the cushion and cover are not shown.

NOTE:

Disengaging the rear seat backrest from the mountings will be enough.

Fig 1: Identifying Center Bracket

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1-.

-- Remove the center support -2- from the underbody -3-.