LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Seat Frames) >> 72 Seat Frames >> Front Seats >> Seat Functions Control Module, Removing And Installing >> Installing

Seat Functions Control Module, Removing And Installing: Installing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA69-11209Courtesy of AUDI OF AMERICA, LLC

-- If the control module was replaced, follow the sequence when connecting the connectors.

-- First connect the connector -5- (coding connector), then connect the other connectors -1 to 4-.

Further installation is the reverse order of removal.

scientia non olet · About LEMON Manuals