Overview - Seat Pan, Power Seat Forward/Back Adjustment, Standard Seat, China Version
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 22 Nm
- Self-locking
- Replace after removing.
- Clean the threaded hole for the bolt with a thread tap, for example
- Bolt
- 22 Nm
- Self-locking
- Replace after removing.
- Clean the threaded hole for the bolt with a thread tap, for example
- Seat Pan Upper Frame
- Removing and installing. Refer to LOWER FRAME, REMOVING AND INSTALLING, SEAT FORWARD/BACK ADJUSTMENT MOTOR, STANDARD SEAT, CHINA VERSION .
- To replace, install all electrical and electronic components and wires in the new upper frame.
- Bolt
- 22 Nm
- Self-locking
- Replace after removing.
- Clean the threaded hole for the bolt with a thread tap, for example
- Seat Pan Lower Frame
- With forward/back adjustment motor
- Removing and installing. Refer to LOWER FRAME, REMOVING AND INSTALLING, SEAT FORWARD/BACK ADJUSTMENT MOTOR, STANDARD SEAT, CHINA VERSION .
- Bolt
- 22 Nm
- Self-locking
- Replace after removing.
- Clean the threaded hole for the bolt with a thread tap, for example
- Bushing
- Inserted in all bearing locations
- Cannot be replaced with service equipment
- The assembly component must be replaced if the bushing is damaged