Overview - Front Backrest, Standard Seat, China Version

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Front Backrest (Standard Seat/Sport Seat)

Courtesy of AUDI OF AMERICA, LLC

Seat Pan
Bolt
- 33 Nm
- Quantity: 2
- Self-locking
- Replace after removing.
- Threaded holes for the bolts must be cleaned, for example, with a thread tap
Backrest
- Removing and installing. Refer to FRONT BACKREST, REMOVING AND INSTALLING .
Headrest
- Removing and installing. Refer to HEADREST, REMOVING AND INSTALLING, STANDARD SEAT, CHINA VERSION .
Backrest Cover
- Vehicles with cargo net: the cargo net cannot be separated from the backrest cover.
- Removing and installing. Refer to BACKREST COVER, REMOVING AND INSTALLING, STANDARD SEAT, CHINA VERSION .
- Attach to the top of the backrest frame and then press on it until it audibly locks
Bolt
- 33 Nm
- Quantity: 2
- Self-locking
- Replace after removing.
- Threaded holes for the bolts must be cleaned, for example, with a thread tap
Wiring Harness
- From the thorax airbag to the connector station
- Depending on the vehicle version, there may be more wiring harnesses, such as for the backrest heating