Overview - Front Backrest, Backrest Adjustment Motor
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Adjustment Shaft
- Bolt
- 7.5 Nm
- Backrest Adjustment Motor
- Removing and installing. Refer to DRIVER AND FRONT PASSENGER BACKREST ADJUSTMENT MOTOR -V45- / -V46-, REMOVING AND INSTALLING .
- Connector
- Backrest Frame
- Lock Washer
- Replace after removing.
- Push onto the adjustment shaft so that there is still at least 1.0 mm of play