LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Seat Frames) >> 72 Seat Frames >> Front Seats >> Overview - Front Backrest >> Overview - Backrest Adjustment Motor, Standard Seat, China Version

Overview - Backrest Adjustment Motor, Standard Seat, China Version

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Backrest Adjustment Motor, Standard Seat, China Version
GWWA72-12355Courtesy of AUDI OF AMERICA, LLC
  1. Pop Rivet
    • Quantity: 2
  2. Bracket
    • Riveted with the backrest frame
  3. Bolt
    • 8 Nm
    • Equipped on some models
  4. Adjustment Shaft
    • The threaded piece for the nut -item 9- must be cleaned, for example, with a thread tap.
    • Coat the threads on the adjustment shaft with locking fluid before installing the nut. Refer to the Parts Information.
  5. Driver Backrest Adjustment Motor -V45-
  6. Bolt
    • 7.5 Nm
    • Replace after removing.
    • Clean the threaded hole for the bolt with a thread tap, for example
    • Use locking fluid when installing the bolt. Refer to the Parts Information for the locking fluid.
  7. Backrest Frame
  8. Washer
    • Equipped on some models
  9. Nut
    • 8 Nm
    • Equipped on some models
    • Replace after removing.
  10. Bolt
    • 8 Nm
    • Equipped on some models
scientia non olet · About LEMON Manuals