Backrest Cover, Removing And Installing, Standard/Sport Seat: Removing
-- Move the front seat all the way forward and up.
-- If installed, pull the backrest cover on the lower edge toward the rear from the first catch and release the clips -1 and 2- using the : 80-200 -arrow-.
-- Grasp on the backrest cover lower edge with both hands pull upward using force and at the same time remove rearward from the hooks in direction of -arrows-.
-- At the same time the lower hooks -A arrows- are disengaged from the backrest frame, if necessary use the : 80-200 .
-- Pull the backrest cover by hand toward the rear with force which causes the side hooks -B arrows- to release from the backrest frame.
-- Push a flat-head screwdriver between the cushion and cover, as shown.
-- Push the cushion to the side, disengage the hook -arrow A- and hooks -arrow B- with a screwdriver and at the same time pull the backrest cover downward from the catches.
-- Repeat the procedure for the hook on the opposite side.
-- Pull the backrest cover downward from the backrest frame catches in direction of -arrows- and remove.