LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Seat Frames) >> 72 Seat Frames >> Front Seat Pneumatic System >> Driver Seat Bolster/Backrest Inflation Adjustment Valve Block -V378- / Front Passenger Seat Bolster/Backrest Inflation Adjustment Valve Block -V379-, Removing And Installing >> Installing

Driver Seat Bolster/Backrest Inflation Adjustment Valve Block -V378- / Front Passenger Seat Bolster/Backrest Inflation Adjustment Valve Block -V379-, Removing And Installing: Installing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Cut the pneumatic lines on the new seat/backrest bolster adjuster valve block based on the old seat/backrest bolster adjuster valve block.

-- Connect the pneumatic lines. Refer to PNEUMATIC LINES, DISCONNECTING AND CONNECTING .

Further installation is the reverse order of removal.

scientia non olet · About LEMON Manuals