Passenger Occupant Detection System, Removing And Installing: Notes
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Pry Lever: 80-200
- The passenger occupant detection system is only installed in the passenger seat.
- The service kit for the passenger occupant detection system must always be installed completely.
- This means that the components that belong together from the passenger occupant detection system service kit (Passenger Occupant Detection System Control Module -J706- and the passenger occupant detection system) must always be installed.
- Interchanging one of the components Passenger Occupant Detection System Control Module -J706- or the passenger occupant detection system with another vehicle is not permitted.
- The parts of the service kit are different depending on the seat version. Refer to the Parts Information.