Knee Airbag With Igniter, Removing And Installing, Front Passenger Side: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Risk of injury due to involuntary deployment.
- Pay attention to the safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
- Observe the disposal regulations for pyrotechnic components. Refer to AIRBAG, BELT TENSIONER AND BATTERY CUT-OUT UNITS, STORING, TRANSPORTING AND DISPOSING (PYROTECHNIC COMPONENTS) .
-- Remove the glove compartment. Refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .
-- Open the glove compartment lid.
-- Place the glove compartment on a surface, and do not place the airbag with the collision cushion downward.
-- Remove the nuts -A and B arrows-.
-- Remove the bracket -1-.
-- Unclip the knee airbag -2- from the glove compartment.
WARNING:
Risk of injury due to involuntary deployment.
- Lay the airbag so that the collision cushion faces upward.