Center Armrest Upper Section, Removing And Installing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Pry Lever :80-200
Removing, Version 1
-- Fold the center armrest up.
-- Starting at the back, unclip the cover -1- from the center armrest in direction of -arrows- using the :80-200 .
-- Unclip the cover completely and remove it.
-- Remove the bolts -1 and 2-.
-- Disengage the center armrest upper section -3- -arrow- and remove it.
Removing Version 2
-- Fold the center armrest up.
-- Starting at the back, unclip the cover -1- from the center armrest -arrows- using the :80-200 .
-- Unclip the cover completely and remove it.
-- Remove the bolts -1-.
-- Disengage the center armrest upper section -2- -arrow- and remove it.
Installing
Install in reverse order of removal.