Sun Shade, Removing And Installing, Rear Window: Installing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- If it has already been removed, install the sun shade -1- onto the back part of the rear shelf -2- and keep pressing down on it until it audibly clicks into place.
-- Insert the sun shade -1- into the rear window frame and tighten the screws.
- The pins on the rear shelf must engage in the mounts -arrow- in the rear window frame.
-- Carefully insert the guide rail -2- into the connecting piece for the sun shade -1-.
- The sun shade guide channel must run into the guide rail without the connecting piece being offset.
-- Press the guide into place until the retainers -3- audibly engage with the connecting piece.
Further installation is the reverse order of removal.