Overview - Screen Separator

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Screen Separator

Courtesy of AUDI OF AMERICA, LLC

Screen Separator Mount Trim
- Clip into the rear seat backrest
Rubber Grommet
- For the screen separator bracket
- Slide over the bracket and insert into the trim panel
Bolt
- 4.5 Nm
- 3 each
Screen Separator Bracket
- Removing and installing. Refer to SCREEN SEPARATOR BRACKET, REMOVING AND INSTALLING .
- Quantity: 2
Bolt
- 9 Nm
Mounting Eye
- For the screen separator
- Removing and installing. Refer to SCREEN SEPARATOR MOUNTING EYE, REMOVING AND INSTALLING .
- Position the securing tab on the mounting eye in the opening in the body
- Quantity: 4
Screen Separator
Guide Rail
- Insert into the mount
Screen Separator Mount
- Bolted to the rear seat backrest
- Removing and installing. Refer to SCREEN SEPARATOR MOUNT, REMOVING AND INSTALLING .
- Quantity: 2
Bolt
- 9 Nm
- Replace after removing.
- Threaded holes for the bolts must be cleaned, for example, with a thread tap
- Self-locking
- 3 each