Center Console Insert, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the center console decorative trim. Refer to CENTER CONSOLE DECORATIVE TRIM, REMOVING AND INSTALLING .
-- If installed, remove the screw -arrow-.
-- Versions with gearshift lever: lift the shift lever boot -1- by hand or carefully pry it out at the side using the :3409 in direction of -arrows- and fold it upward.
-- Versions with selector lever: remove the selector lever handle. Refer to the appropriate service information .
-- Starting at the back, unclip the center console insert upward from the center console in direction of -arrow- using the :3409 .
-- Disengage the remaining retainers for the center console insert.
-- Carefully turn the center console insert -1-, disconnect the connectors and remove them.