Seat Belt Webbing, Checking

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Procedure

-- Pull the belt completely out of the automatic belt retractor or lap belt adjustment tongue.

-- Check the seat belt webbing for contamination, wash with mild soapy water if necessary. Refer to the Owner's Manual.

If one of the types of damage (1 and 2) shown in the following is detected on a vehicle which has been in an accident - replace the entire seat belt with seat belt latch.
If damage as illustrated under points 1, 2 or 3 is determined on a vehicle that has not been in an accident, only replace the damaged seat belt.
1 - Seat belt webbing cut, torn or frayed.

Fig 1: Belt Webbing Cut, Torn Or Chafed
Courtesy of AUDI OF AMERICA, LLC
2 - Webbing loops on seat belt edge torn.

Fig 2: Checking Belt Webbing - Webbing Loops On Belt Edge Torn
Courtesy of AUDI OF AMERICA, LLC
3 - Burn marks from cigarettes or similar.

Fig 3: Burn Marks From Cigarettes Or Similar
Courtesy of AUDI OF AMERICA, LLC