Passenger Occupant Detection System Deactivation After A Collision, Market-Specific

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Each time an airbag or passenger belt tensioner deploys, a basic setting must be performed on the passenger occupant detection system control module using the Vehicle Diagnostic Tester.
If the seat rails and/or seat pan is replaced due to deformations resulting from a collision, the passenger occupant detection system must be replaced using the "passenger occupant detection system service kit". Then perform a "basic setting" on the passenger occupant detection system control module using the Vehicle Diagnostic Tester.