Fuel Gauge Sensor -G-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Follow all safety precautions. Refer to SAFETY PRECAUTIONS .
-- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Remove the fuel delivery unit. Refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .
-- Reach through the fuel tank opening, release the catch -2- in direction of -arrow A- and at the same time remove the bracket Fuel Level Sensor -G- -1- from the mount on the baffle housing in direction of -arrow B-.
NOTE:
Be careful not to bend the floater arm on the fuel level sensor when removing.
Take care when removing the Fuel Gauge Sensor -G- to make note of the position it was removed.
-- Carefully remove the Fuel Gauge Sensor -G- from the fuel tank opening.