LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Fuel Supply) >> 20 Fuel Supply >> Accelerator Mechanism >> Accelerator Pedal Position Sensors -G79- / -G185-, Removing And Installing >> Removing

Accelerator Pedal Position Sensors -G79- / -G185-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the driver side instrument panel cover. Refer to DRIVER SIDE INSTRUMENT PANEL COVER, REMOVING AND INSTALLING .

-- Press the release and disconnect the connector -2-.

Fig 1: Accelerator Pedal Position Sensor -G79- /Accelerator Pedal Position Sensor 2 -G185-
GWWA20-11427Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1-.

-- Disengage the lower accelerator pedal module -3- from the pedal bracket and remove.