Control Module for Emergency Call Module and Communication Unit -J949-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove the luggage compartment floor covering.
The Control Module for Emergency Call Module and Communication Unit -J949- -1- is engaged in the bracket -2-.
-- Press the retainers -A arrows- and pry out the Control Module for Emergency Call Module and Communication Unit -J949- -1- -B arrow-.
-- Release and disconnect the connectors from the Control Module for Emergency Call Module and Communication Unit -J949- -1-.
Bracket, Removing
-- Remove the nut -3- and remove the bracket -2- from the threaded pins -3 and 4-.
-- Audi A4 Avant g-tron: remove the nuts -3 and 4- and remove the bracket -2- from the threaded pins -3 and 4-.