Overview - Main Fuse Panel
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Main Fuse Panel
- On the battery
- Removing and Installing. Refer to MAIN FUSE PANEL ON BATTERY, REMOVING AND INSTALLING .
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Nut
- 18 Nm
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Line
- Tightening specification: 7.5 Nm
- Allocation. Refer to the appropriate Wiring Diagram.
- Nut
- 7.5 Nm
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Bolt
- 3.5 Nm
- Line
- Tightening specification: 7.5 Nm
- Allocation. Refer to the appropriate Wiring Diagram.
- Nut
- 7.5 Nm
- Line
- Allocation. Refer to the appropriate Wiring Diagram.
- Battery Interrupt Igniter -N253-
- Removing and Installing. Refer to the appropriate service information .
- Nut
- Tightening specification. Refer to the appropriate service information .
- Replace after removing.
- Quantity: 2
- Connector
- For the Battery Interrupt Igniter -N253-