Fuse Panel, Removing And Installing: Removing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove relay and fuse panel 1. Refer to Relay and Fuse Panel 1 -SR1-, REMOVING AND INSTALLING .

-- Unlock the release and remove it from the fuse panel.

-- Remove the fuses from the fuse panel.

-- Open the clips in direction of -arrows- and remove the fuse panel cover.

Fig 1: Releasing Clips And Removing Cover From Fuse Holder

Courtesy of AUDI OF AMERICA, LLC

-- Pull off retaining strip -1- for the connectors in direction of -arrow- and remove the connectors from the plug-in socket

Fig 2: Pulling Off Retaining Strip

Courtesy of AUDI OF AMERICA, LLC