LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Wiper/Washer Systems) >> 92 Wiper/Washer Systems >> Windshield Wiper System >> Wiper Blade, Removing And Installing >> Removing

Wiper Blade, Removing And Installing: Removing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Bring the windshield wiper into the service position. Refer to WINDSHIELD WIPER, BRINGING INTO SERVICE POSITION .

-- Lift the windshield wiper arm off the windshield.

-- Press the clip in the direction of -arrow A- and slide the wiper blade -1- off of the windshield wiper arm -2- in the direction of -arrow B-.

Fig 1: Bring Windshield Wiper Into Service Position
GWWA92-10076Courtesy of AUDI OF AMERICA, LLC

-- Remove the wiper blade.