Window Frame Trim Panel, Removing And Installing: Installing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Window Frame Trim Panel

-- Insert the window frame trim panel -2- in the upper front section of the window guide -1- -arrow- .

-- Install window frame trim panel -2- along the entire length of the window guide.

Fig 2: Window Frame Trim Panel & Window Frame Trim Panel

-- Remove the protective film from the adhesive pads on the new part.

-- Push the trim panel firmly against the door in the adhesive pad area -1, 3-

NOTE:

Ignore the -arrows- .

Further installation is the reverse order of removal.