LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Body Front) >> 50 Body Front >> Fender >> Fender Brace, Removing And Installing >> Fender Brace, Removing And Installing, A5 >> Removing

Fender Brace, Removing And Installing, A5: Removing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Remove the front wheel spoiler. Refer to FRONT WHEEL SPOILER, REMOVING AND INSTALLING .

Left:

GWWA50-11217Courtesy of AUDI OF AMERICA, LLC

-- Free up the breather hose -1- for the headlamps.

-- Free up the wiring harnesses -4 and 5-.

-- Remove the bolts -2, 3 and 7-.

-- Remove the fender brace -6-.

Right:

-- If equipped, loosen the parking heater from the body. Refer to the appropriate service information .

-- Free up the connector -2-.

GWWA50-11197Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -1- and free up the wiring harness -3-.

-- Free up the breather hose -2- for the headlamps.

GWWA50-11218Courtesy of AUDI OF AMERICA, LLC

-- Free up the wiring harness at -items 1 and 3-.

-- Remove the bolts -4, 5 and 7-.

-- Remove the fender brace -6-.