LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> S4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 55 (Body Front) >> 50 Body Front >> Fender >> Brace And Outer Fender Brace, Removing And Installing >> Brace And Outer Fender Brace, Removing And Installing, A5 >> Removing

Brace And Outer Fender Brace, Removing And Installing, A5: Removing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the bumper cover mount. Refer to BUMPER COVER MOUNT, REMOVING AND INSTALLING .

Left:

GWWA50-11219Courtesy of AUDI OF AMERICA, LLC

-- Free up the breather hose -1- for the headlamps.

-- Free up the wiring harnesses -4, 5 and 6-.

-- Remove the bolts -3 and 8- and the double bolts -2-.

-- Remove the fender brace -7-.

Right:

GWWA50-11197Courtesy of AUDI OF AMERICA, LLC

-- If equipped, loosen the parking heater from the body. Refer to the appropriate service information .

-- Free up the connector -2-.

-- Remove the nut -1- and free up the wiring harness -3-.

-- Free up the breather hose -3- for the headlamps.

GWWA50-11220Courtesy of AUDI OF AMERICA, LLC

-- Free up the wiring harness at -items 1 and 2-.

-- Remove the bolts -4 and 7- and double bolts -5-.

-- Remove the fender brace -6-.

Continuation:

GWWA50-11198Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -4 and 5- and nut -2-.

-- Remove the brace -1- and the outer fender brace -3-.