Brace And Outer Fender Brace, Removing And Installing, A4: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the bumper cover mount. Refer to BUMPER COVER MOUNT, REMOVING AND INSTALLING .
Left:
-- Free up the wiring harnesses -3, 4 and 5-.
-- Remove the bolts -6- and the double bolts -2-.
-- Remove the fender brace -1-.
Right:
-- Free up the connector -1-.
-- Remove the nut -2- and free up the wiring harness -3-.
-- Free up the wiring harness -2 and 3-.
-- Remove the bolts -1- and the double bolts -4-.
-- Remove the fender brace -5-.
Continuation:
-- Remove the bolts -1 and 5- and the nut -3-.
-- Remove the brace -2- and the outer fender brace -4-.