Plenum Chamber Side Cover, Removing And Installing: Removing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear cover for the fender. Refer to REAR FENDER COVER, REMOVING AND INSTALLING .
-- Use the :VAS1978/14A to warm up the cover -1- carefully near the A-pillar.
-- Pry out the cover in direction of -arrows- and remove it carefully near the bonding -2-.