Exhaust Gas Temperature Sensor 4 -G648-, REMOVING AND INSTALLING: Installing

WARNING: This page is about a different car, the 2020 Audi A4, 2019 Audi A4, 2018 Audi A4, and 2017 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and Note The Following:

Protect the exhaust gas temperature sensor against knocks and impacts. A dropped exhaust gas temperature sensor may not be used again.

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .