Exhaust Gas Temperature Sensor 3 -G495-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2020 Audi A4, 2019 Audi A4, 2018 Audi A4, and 2017 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the plenum chamber bulkhead. Refer to BULKHEAD .
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Disconnect the connector -2- and free up the wire.
-- Remove the Exhaust Gas Temperature Sensor 3 -G495- -1-.