Refrigerant Lines With Inner Heat EXCHANGER, Removing And Installing: Installing

WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

Coat the O-ring seals lightly with refrigerant oil before installing. Refer to REFRIGERANT CIRCUIT SEALS .
Install the refrigerant lines stress-free.

-- Check the grommet -D- of the pass-through for damage and correct seating in the opening on the body (check the catches -E-).

-- Insert both refrigerant lines to the expansion valve -D and E- after installing the inner heat exchanger -C- in the bracket -B-.

Courtesy of AUDI OF AMERICA, LLC

-- Insert both refrigerant lines -B and C- after installing on the inner heat exchanger -E- in the bracket -D-.

Courtesy of AUDI OF AMERICA, LLC

-- Install the bolts -A-.

-- Check the routing of the refrigerant lines after attachment. They must be inserted in the provided brackets in a tension-free manner and must not come in contact with other components.

-- Evacuate and charge the refrigerant circuit. Refer to Refrigerant Circuit or Working with A/C Service Station (1 Of 2) / Working with A/C Service Station (2 Of 2) .

-- Start the A/C system after charging the refrigerant circuit. Refer to A/C SYSTEM, STARTING AFTER CHARGING REFRIGERANT CIRCUIT .