Evacuating And Charging Valve, Removing And Installing, Low And High Pressure Side: Notes
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Torque Screwdriver :VAS6494
- Engine Bung Set :VAS6122
- Refrigerant Sockets :T10364
- There is additional information for the service connection. Refer to A/C System, General Information or GENERAL DESCRIPTION - REFRIGERANT CIRCUIT COMPONENTS .
Depending on the vehicle version installed in the left plenum chamber (near the brake fluid reservoir, as shown here) under the plenum chamber or in the left engine compartment