Fresh Air Blower -V2- With Fresh Air Blower Control Module -J126-, Removing And Installing: Installing
WARNING: This page is about a different car, the 2021 Audi S4 and 2021 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Check the air intake manifold -C- via the shaft for the Fresh Air Blower -V2- -B- for contamination and clean if necessary.
-- When installing, make sure the Fresh Air Blower -V2- -B- fits correctly in air intake manifold -C-.